Here is your PDF: MSDS 050306 (FSI-FILE; Keywords: section zinc chemical contact dust fire fresh

The number of pages within the document is: 2

The self-declared author(s) is/are:
ldecraene

The subject is as follows:
Original authors did not specify.

The original URL is: LINK

The access date was:
2019-02-16 16:21:27.526243

Please be aware that this may be under copyright restrictions. Please send an email to admin@pharmacoengineering.com for any AI-generated issues.

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

The content is as follows:
859.30 Material Safety Data Sheet (MSDS)SECTION 1 Š CHEMICAL PRODUCT AND COMPANY IDENTIFICATION SECTION 2Š COMPOSITION, INFORMATION ON INGREDIENTS Zinc DustZinc DustSECTION 3Š HAZARDS IDENTIFICATION Call a physician, seek medical attention for further treatment, observation and support after first aid. Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately. Eye: Immediately flush with fresh water for 15 minutes. External: Wash continuously with fresh water for 15 minutes. Internal: Give large quantities of water. Call a physician or poison control at once. SECTION 4Š FIRST AID MEASURES SECTION 7Š HANDLING AND STORAGE Avoid contact with eyes, skin, and clothing. Wear chemical splash goggles, chemical-resistant gloves, and chemical-resistant apron. Bluish-gray powder. Odorless. Inhalation of zinc dust may cause lung irritations . Zinc dust can spontaneously combust when in contact with moisture. SECTION 5Š FIRE FIGHTING MEASURES Nonflammable solid. Finely divided zinc dust is a severe fire hazard. Zinc dust in contact with water or damp air evolves hydrogen gas. The heat produced may ignite the hydrogen gas. Minimize contact with moisture. Fire Fighting Instructions: Use triclass, dry chemical fire extinguisher. Firefighters should wear PPE and SCBA with full facepiece operate d in positive pressure mode. SECTION 6Š ACCIDENTAL RELEASE MEASURES Restrict unprotected personnel from area. Sweep up, place in sealed bag or container a nd dispose. Ventilate area and wash spill siteafter material pickup is complete. See Sections 8 and 13 for further information. SECTION 8Š EXPOSURE CONTROLS, PERSONAL PROTECTION Flinn Suggested Chemical Storage Pattern: Inorganic #1. Store with metals and metal hydrides. Store in a cool, dry, well- ventilated store room. November 15, 2010 Revision Date: MSDS #:CHEMTRECEmergency Phone Number: (800) 424-9300 LINNCIENTIFICNCFlinn Scientific, Inc. P.O. Box 219 Batavia, IL 60510 (800) 452-1261 Health-0Flammability-3 Reactivity-2 Exposure-1 Storage-1 FLINN AT-A-G LANCE PAGE 1OF2NFPA C ODENone established ©Flinn Scientific, Inc. All Rights Reserved. 0 is low hazard, 3 is high hazard7440-66-6 CAS#:

Please note all content on this page was automatically generated via our AI-based algorithm (aer8bQEJR8FNHLnLYTBB). Please let us know if you find any errors.